Fitting Instructions

Fitting Instructions

Plantsurge is so easy to fit, it can be clipped on to a 15 mm metal water pipe or plastic garden hose in under 15 seconds. There are no pipes to cut, no electrical mains supply required, no corrosive salts are added to the water system and there are no running costs or maintenance required. We also supply a larger unit for pipes over 15 mm

  • Wear garden gloves before fitting the device
  • TWIST – SLIDE – SEPARATE
  • Easy to fit, clip to water pipe or garden hose in under 15 seconds
  • No pipes to cut, no electrical mains supply required, no corrosive salts
  • ​No running costs or maintenance required.
plantsurge magnetic water system

Where to fit Plantsurge?

The ideal place to fit Plantsurge is clip it on to a cold water 15mm pipe. If you want to water indoor plants, clip it on to the cold-water pipe under your kitchen sink. For outdoor watering clip to pipe on the outside cold-water tap. Many gardeners also clip the Plantsurge to a plastic garden hose. Tap water will stay magnetised for up to 100 hours, which means you can use in watering cans or containers without losing benefits.

How do I fit Plantsurge?

The best way to fit Plantsurge is to TWIST the top part - this then allows you to SLIDE and SEPARATE the two parts away from each other more easily. You can then join the two parts together with your hose pipe or water pipe enclosed between them..

If you have any questions, please call us on 0208 211 3666 or email customerservices@ecocamel.com

Twist

plantsurge magnetic water system

Twist

Slide

plantsurge magnetic water system

Slide

Separate

plantsurge magnetic water system

Separate